* Nextchip NVP6324 AHD to MIPI CSI2 decoder

Required Properties:
- compatible: should be "jaguar1-v4l2"
- clocks: reference to the Single 27M Oscillator.
- clock-names: should be "xvclk".
- pd-gpios: High active nvp6324 powerdown gpio
- pd2-gpios: High active ahd camera  powerdown gpio
- rst-gpios: High active nvp6324 reset gpio
- rst2-gpios: High active ahd camera reset gpio

Optional Properties:
- rockchip,default_rect= <1920 1080>; // default resolution

NVP6324 device address 0x30(7bit);
The device node must contain one 'port' child node for its digital output
video port, in accordance with the video interface bindings defined in
Documentation/devicetree/bindings/media/video-interfaces.txt.

Example:

&i2c4 {
	status = "okay";

	jaguar1: jaguar1@30 {
		compatible = "jaguar1-v4l2";
		status = "okay";
		reg = <0x30>;
		clocks = <&cru CLK_CAM0_OUT>;
		clock-names = "xvclk";
		power-domains = <&power RK3568_PD_VI>;
		pd-gpios = <&gpio4 RK_PB4 GPIO_ACTIVE_HIGH>;
		/*pd2-gpios = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>;*/
		rst-gpios = <&gpio3 RK_PB6 GPIO_ACTIVE_HIGH>;
		/*rst2-gpios = <&gpio2 RK_PC5 GPIO_ACTIVE_HIGH>;*/
		rockchip,camera-module-index = <0>;
		rockchip,camera-module-facing = "back";
		rockchip,camera-module-name = "jaguar1";
		rockchip,camera-module-lens-name = "jaguar1";
		rockchip,default_rect= <1920 1080>; // default resolution
		port {
			n4_out: endpoint {
				remote-endpoint = <&mipi_in_ucam3>;
				data-lanes = <1 2 3 4>;
			};
		};
	};
};
